Dollies

Home/Dollies
  • SUPER FALCON II today is the best dolly for professional film makers. Characterized by great stability, manoeuvrability, manageability and versatility, it requires the absolute minimum of maintenance. Engineered and designed with the latest technology in structural materials and surface finishes, tested thoroughly to ensure an accurate and reliable operation. The SUPER FALCON II dolly is very resistant so guarantees its performance under every environmental condition.Dolly can be equipped with two different types of wheels; the standard wheel of selected hardness may be used directly on the studio floor, or on any standard track; and mixed wheel incorporating the standard wheel along with an inflated rubber wheel, excellent flexibility and performance when used on whatever surface even if it is not completely smooth. Steering mode can be quickly changed from four wheel "CRAB" operation, into "ROUND" four-wheel steering and two wheel "CONVENTIONAL" operation or vice versa by simply twisting the steering bar handle. A very high tech gears steering is located between the rear wheels to facilitate this operation in the "ROUND" mode, avoiding friction. The steering column can be removed by unscrewing the threaded base ring and the transmission shaft. A simple release device, at the base of the column, locks the steering facilitating realignment of the wheels when this is necessary. The steering box is a gear-base one, so there is no need for adjustment of the chains.The dolly's vertical lift maintains precise camera alignment during the whole run of the arm. It is possible to mount the 90° Accessory plate on the mounting plate, so operator can work in the very low positions. Pressure accumulator may be recharged manually (by removing the control bar and inserting it in the manual pump and pumping), or electrically (the pump motor is connected to the main power by a supplied cable and activated by an ON/OFF switch). The motor automatically stops when it reaches the preselected pressure. Aspecial device, in both cases, prevents any damage by over pressurizing.Dolly is equipped with a new kind of piston that embodies an end run "dashpot".
  • SUPER HAWK II today is the best dolly for professional film makers. Characterized by great stability, manoeuvrability, manageability and versatility, it requires the absolute minimum of maintenance. Engineered and designed with the latest technology in structural materials and surface finishes, tested thoroughly to ensure an accurate and reliable operation. The SUPER HAWK II dolly is very resistant so guarantees its performance under every environmental condition. Dolly can be equipped with two different types of wheels; the standard wheel of selected hardness may be used directly on the studio floor, or on any standard track; and mixed wheel incorporating the standard wheel along with an inflated rubber wheel, excellent flexibility and performance when used on whatever surface even if it is not completely smooth.Steering mode can be quickly changed from four wheel "CRAB" operation, into "ROUND" four-wheel steering and two wheel "CONVENTIONAL" peration or vice versa by simply twisting the steering bar handle. A very high tech gears steering is located between the rear wheels to facilitate this operation in the "ROUND" mode, avoiding friction. The steering column can be removed by unscrewing the threaded base ring and the transmission shaft. A simple release device, at the base of the column, locks the steering facilitating realignment of the wheels when this is necessary. The steering box is a gear-base one, so there is no need for adjustment of the chains.The dolly's vertical lift maintains precise camera alignment during the whole run of the arm. It is possible to mount the 90° Accessory plate on the mounting plate, so operator can work in the very low positions. Pressure accumulator may be recharged manually (by removing the control bar and inserting it in the manual pump and pumping), or electrically (the pump motor is connected to the main power by a supplied cable and activated by an ON/OFF switch). The motor automatically stops when it reaches the preselected pressure. Aspecial device, in both cases, prevents any damage by over pressurizing.Dolly is equipped with a new kind of piston that embodies an end run "dashpot".
  • The Smaller brother of the falcon dolly features a 2 steering with a very fluid arm
  • Recognized as the industry standard, the Model 10 Dolly is manufactured from the highest quality materials and components to meet the demanding needs of the motion picture, television and video industries. This stable, reliable Dolly offers operators versatile features and a wide variety of accessories. The Model 10 Dolly is smooth, quiet and easy to use, with a reputation for being safe, well-made and its low maintenance.* Three easily shifted steering modes (crab, conventional and round)* Tight turning radius* Mechanically compensated steering for accuracy* Self-contained track system for use on Square Track* Self-dampening hydraulic system* Self-bleeding hydraulic system* Charging system accepts 90-240v AC or DC to quickly charge the hydraulic system* Self-centering hydraulic control knob or up/down lever with safety lock* Manual hydraulic hand pump for use when electrical power is unavailable* Lift beam position (cue) indicator* Folding controls for transportation and storage* Comfortable sliding seats with adjustable height* Pneumatic Wheels* Single-lever actuated four-wheel positive locking brake system* Multi-Position Level Head with Mitchell mount and four leveling thumb screws* Camera battery compartment* Cable clips on lift beam for camera and battery cables* Eight seat mount locations* Removable Push Posts, also used as rear carry handles and manual pump handle* Utility hooks on Push Posts* Carpeted standing areas* 500-pound (226.80 kg) lift capacity* Seven lifts per system charge Max. lift beam elevation with Standard Level Head (SLT) 62.625 inches (159.068 cm)Min. lift beam elevation with Standard Level Head (SLT) 13.75 inches (34.925 cm)Min. lift beam elevation with Low Level Head (LHT) 3.125 inches (7.938 cm)Vertical beam travel - 46.875 inches (119.063 cm)Lift capacity - 500 pounds (226.8 kg)Length - 55.5 inches (140.97 cm)Width - 26.5 inches (67.31 cm)Height (operating) - 38.625 inches (98.108 cm)Height (folded) - 25 inches (63.5 cm)Minimum turn radius (round steering) - 22 inches (55.88 cm)Minimum turn radius (conventional steering) - 44 inches (111.76 cm)Carrying weight - 420 pounds (190.51 kg)Maximum Dolly load capacity - 900 pounds (408.23 kg)
  • Lightweight and compact, it is built with the same high quality standards found in all J.L. Fisher products. The Model 11 Dolly shares the same controls and characteristics of the Model 10 Dolly and has a complete line of its own accessories. It operates effortlessly on Square or Round Track, making the Model 11 and Model 10 an excellent two dolly combination.The Model 11 Dolly is engineered and manufactured to meet the demanding production needs of the motion picture, television and video industries. Compact size, three-way steering and a solid lift beam give operators a wide variety of options.The reliable, quiet, smooth and safe Model 11 requires minimal maintenance.* Lightweight* Compact size* Three easily shifted steering modes (crab, conventional and round)* Tight turning radius* Mechanically compensated steering for accuracy* Self-contained track system for both Round and Square Track* Self-dampening hydraulic system* Self-bleeding hydraulic system* Charging system accepts 90-240v AC or DC to quickly charge the hydraulic system* Self-centering hydraulic control knob or up/down lever with safety lock* Manual hydraulic hand pump for use when electrical power is unavailable* Lift beam position (cue) indicator* Folding controls for transportation and storage* Comfortable sliding seats with adjustable height* Pneumatic Wheels* Single-lever actuated four-wheel positive locking brake system* Multi-Position Level Head with Mitchell mount and four leveling thumb screws* Camera battery compartment* Cable clips on lift beam for camera and battery cables* Six seat mount locations* Removable Push Posts, also used as rear carry handles and manual pump handle* Utility hooks on Push Posts* Carpeted standing areas* 200-pound (90.72 kg) lift capacity* 7 lifts per system charge Max. lift beam elevation with Standard Level Head (SLE)51.125 inches (129.858 cm)Min. lift beam elevation with Standard Level Head (SLE)13.75 inches (34.925 cm)Min. lift beam elevation with Low Level Head (LHE)3 inches (7.62 cm)Vertical beam travel - 33.375 inches (84.773 cm)Lift beam capacity - 200 pounds (90.72 kg)Length- 40 inches (101.6 cm)Width - fully op. steering (wheels in) - 20.4 inches (51.7 cm)Width - fully op. steering (wheels out) - 25.7 inches (65.4 cm)Height (operating) - 39.625 inches (100.648 cm)Height (folded) - 23.125 inches (58.738 cm)Minimum turn radius (round steering) - 16.188 inches (41.116 cm)Minimum turn radius (conventional steering) - 33.5 inches (85.1 cm)Carrying weight - 307 pounds (139.25 kg)Maximum Dolly load capacity - 900 pounds (408.23 kg)
  • Camera movement...that is what Chapman is all about! You may not always see them on screen, but they have been here a long time... Since 1945 Chapman Studio Equipment has been supplying camera support equipment to various productions. From feature films, commercials, television series, music videos to infomercials, Chapman has moved it, helping to create many of the memorable scenes we all know today!All along, Chapman has been involved with camera movement. Chapman equipment, under the careful direction of the Director, Director of Cinematography and Dolly Grip, has created moments of fear, impact, loneliness, confusion and many other emotions that camera movement can enhance for a scene.Chapman is continuing to develop new and improved ways to move the camera. Combining old techniques with new, it is their goal to accommodate the Director and Director of Cinematography in their creative process and obtain the image they want to etch on film.* Revolutionary new three mode transmission featuring conventional, crab and round steering that can be shifted while the dolly is moving or stationary, without the dolly operator's hands leaving the steering handle. This transmission has the ability to be adjusted to provide perfect steering geometry when reconfiguring the chassis to its various leg positions. No other transmission has been able to do this.* The Super PeeWee IV now provides for much less maintenance.(a) The need for air bleeding has been eliminated.(b) Corrosion resistance has been dramatically improved.(c) All exposed working joints have been sealed.(d) Far greater precision greatly reduces the need for adjustments. All adjustments, if required by operator's specific desires, can be done externally without removing bolted covers or lids.(e) Steering chain adjustments have been virtually eliminated, dramatically reducing maintenance time.(f) Larger hydraulic capacity requires less recharging.(g) Greater strength reduces the possibility of damage.(h) Modular design of steering transmission and shifting linkage facilitates quick and easy replacements.* New arm design provides greater operator clearance, while assuring greater rigidity, smoothness, speed and added vertical travel. This new trim arm design also allows for lower camera setups when the camera is located above the chassis. All edges and corners are rounded to provide for greater operator comfort.* New valve concept gives the operator much improved control, providing for greater speed with added precision.* Stop valve now requires no tools to make adjustments. Accessibility is now directly in front of the dolly operator, providing for quick and easy adjustments.* Improved Universal Head performance is now achieved. Added arm precision, a control cylinder and a middle rib provides major gains in safety and rigidity.* Improved arm performance is exhibited with five full strokes of the arm on a single charge, while still achieving added vertical travel. The rigidity has been dramatically increased. The profile has been streamlined, providing added clearance for lower lens levels when operating over the chassis. This new design also adds to operator comfort. The new internal drive mechanism is smoother and maintenance-free.* Improved valve design provides for smoother, faster and quieter arm control. The dolly operator control has been significantly improved.* The Super PeeWee IV has a new sideboard system. Feedback from thousands of users and our own survey has led to this new design that provides complete walk-a-round ability at both the high and low levels.* Leg positions have been improved to enhance performance by providing:(a) 0º position for narrowest configuration with standard tires.(b) 10º position for narrowest configuration with pneumatic tires OR for side mounting the dolly on 880 mm track.(c) 44º position for standard 24½" track alignment and general all-around use.(d) 84º position for maximum lateral stability or for side mounting dolly on 24½" track.(e) Front legs at 84º, rear legs at 0º. This is the three-point contact position for standard tires which is great for outdoor use on rough terrain.(f) 70º position where Tread and Wheel Base are Equal, called the S position.(g) Front legs at 84º, rear legs at 10º. This is the three-point contact position for pneumatic tires, which is great for outdoor use on rough terrain.(h) Front legs at 180º and the rear legs at 0º provides the most compact dolly configuration with Standard Solid Tires, making the Super PeeWee® IV efficient, even in especially tight quarters.* The Super PeeWee IV now comes with built-in heat control for the hydraulic system to maintain a minimum hydraulic oil temperature of 70°F, thus providing constant performance, even in the coldest environment.Maximum Camera Mount Height (Position 1-90°) - 60,25"/1.5 mMinimum Camera Mount Height (Position 1-90°) - 26,25"/67 cmMaximum Camera Mount Height (Position 3-45°) - 57,5"/1.5 mMinimum Camera Mount Height (Position 3-45°) - 24,25"/52 cmMaximum Cam Mount Height (2-Extender Mode) - 58,25"/1.5 mMinimum Cam Mount Height (2-Extender Mode) - 18,25/46 cmMaximum Camera Mount Height (4-Low Mode) - 49,75"/1.3 mMinimum Camera Mount Height (4-Low Mode) - 17,25"/44 cmMaximum Camera Mount Height (Low Bar w/Lowest 4-Way Leveling Head) - 37,25"/95 cmMinimum Camera Mount Height (Low Bar w/Lowest 4-Way Leveling Head) - 4"/10 cmVertical Boom Travel (Position 1-90°) - 33,25"/85 cmVertical Boom Travel (Position 3-45°) - 33,25"/85 cmVertical Boom Travel (2-Extender Mode) - 41,25"/1 mVertical Boom Travel (Position 4-Low Mode) - 33,25"/85 cm*Max Payload with Accumulator Charge at 2,400psi - 320 lb/145 kg*Max Payload with Accumulator Charge at 2,600psi - 350 lb/159 kg**Maximum Payload with High Post Kit - 1,100 lb./500 kgChassis Maximum Length (Wheels Fully Extended) - 43"/1.1 mChassis Minimum Length (Wheels Fully Retracted) - 34,25"/88 cmMinimum Chassis Height for Transportation - 16"/41 cmChassis Width - Legs at 0° - 20"/51 cmChassis Width - All Legs at 10º (Pneumatic or 880 mm Track Position) - 25"/64 cmChassis Width - All Legs at 44º (Track Position) - 28"/71 cmChassis Width - All Legs at 70º (Tread and Wheel Base Are Equal Position) - 31"/79 cmChassis Width - All Legs at 84º (Sideways or Scissors Track Position) - 31,75"/81 cmChassis Width - Front Legs at 84º/Rear at 0º (3 Point Solid Tire Position) - 31,75/81 cmChassis Width - Front Legs at 84º/Rear at 10º (3 Point Pneumatic Tire Position) 34 5/8" / 880 mmChassis Width - Front Legs at 180º/Rear at 0º (Compact Solid Tire Position) - 20"/51 cmChassis Width - Front Legs at 170º/Rear at 10º (Compact Pneumatic Tire Position) - 25"/64 cmSteering Post Height - 38"/97 cmMinimum Turn Radius - 24"/61 cmMinimum Door Width PeeWee can be carried through - 16"/41 cmAccumulator Charging Time (Empty to Full) - 60 sec.Maximum number of Lifts on a single charge - 5 liftsCarrying Weight - 295 lb./131 kgOperational Weight - 329 lb./155 kgOperational Weight w/ High Post Kit (w/o Payload) - 386 lb./178 kg*Payload Includes All Items (i.e. Man, Camera, Platform, Turret, Crane Arm, etc.) on Arm **Payload Includes All Items (i.e. Man, Camera, Platform, Turret, Crane Arm, etc.) on Base Mount
  • Camera movement...that is what Chapman is all about! You may not always see them on screen, but they have been here a long time... Since 1945 Chapman Studio Equipment has been supplying camera support equipment to various productions. From feature films, commercials, television series, music videos to infomercials, Chapman has moved it, helping to create many of the memorable scenes we all know today!All along, Chapman has been involved with camera movement. Chapman equipment, under the careful direction of the Director, Director of Cinematography and Dolly Grip, has created moments of fear, impact, loneliness, confusion and many other emotions that camera movement can enhance for a scene.Chapman is continuing to develop new and improved ways to move the camera. Combining old techniques with new, it is their goal to accommodate the Director and Director of Cinematography in their creative process and obtain the image they want to etch on film.* Super PeeWee III+ Incorporates a New Improved Universal Head with convenient 4-Way Leveling* Universal Head Has a Built-In Rotating Offset with Lock Off Points every 15 Degrees* Universal Head Has a Variable Head Mount, with Four Positions for Quick Placement of the Camera at Different Heights* Super PeeWee III+ Incorporates Brakes on Rear Wheels* Super PeeWee III+ Is Nickel Plated for Less Maintenance* Super PeeWee III+ Incorporates the Universal Stop Valve System* Variable Chassis Leg Adjustment Cam-Lock Chassis* Hardened Stainless Steel Bushings* Works on Both Straight and Curved Tubular Track* Compact and Lightweight for Travel and Storage* Variety of Tires Available* Rear Controlled Steering* Vertical Arm Travel* Corrected Steering Geometry* Auxiliary Air Tank* Enclosed King Pin System* ELECTRIC PUMP SYSTEM* Many Accessories AvailableMaximum Camera Mount Height (Position 1-90°) - 60,25"/1.5 mMinimum Camera Mount Height (Position 1-90°) - 27"/69 cmMaximum Camera Mount Height (Position 3-45°) - 57"/1.47 mMinimum Camera Mount Height (Position 3-45°) - 23,25"/59 cmMaximum Cam Mount Height (2-Extender Mode) - 58,25"/1.5 mMinimum Cam Mount Height (2-Extender Mode) - 17"/43 cmMaximum Camera Mount Height (4-Low Mode) - 49,75"/1.3 mMinimum Camera Mount Height (4-Low Mode) - 16,5"/42 cmVertical Boom Travel (Position 1-90°) - 33,25"/85 cmVertical Boom Travel (Position 3-45°) - 33,25"/85 cmVertical Boom Travel (2-Extender Mode) - 41,25"/1 mVertical Boom Travel (Position 4-Low Mode) - 33,25"/85 cmMinimum Camera Mount Height (Low Bar w/Lowest 4-Way Leveling Head) - 4"/10 cmMaximum Camera Mount Height (Low Bar w/Lowest 4-Way Leveling Head) - 37,25"/95 cm*Maximum Payload - 250 lb./114 kg**Maximum Payload with High Post Kit - 1,100 lb./500 kgMaximum Boom Lifts (Fully Charged) - 4 LiftsChassis Maximum Length (Wheels Fully Extended) - 43"/1.1 mChassis Minimum Length (Wheels Fully Retracted) - 34,25"/88 cmMinimum Chassis Height for Transportation - 16"/41 cmChassis Width - Legs at 0° - 20"/51 cmChassis Width - Legs at 17° (Pneumatic Tire Position) - 23,5"/60 cmChassis Width - Legs at 45° - 28,5"/71 cmChassis Width - Legs at 90° (Sideways or Scissor Track Position) - 32"/81 cmSteering Post Height - 35"/89 cmMinimum Turn Radius - 24"/61 cmMinimum Door Width PeeWee can be carried through - 16"/41 cmAccumulator Charging Time (Empty to Full) - 60 sec.Carrying Weight - 280 lb./127 kgOperational Weight - 329 lb./150 kgOperational Weight w/ High Post Kit (w/o Payload) - 386 lb./178 kg*Payload Includes All Items (i.e. Man, Camera, Platform, Turret, Crane Arm, etc.) on Arm **Payload Includes All Items (i.e. Man, Camera, Platform, Turret, Crane Arm, etc.) on Base Mount
  • Camera movement...that is what Chapman is all about! You may not always see them on screen, but they have been here a long time... Since 1945 Chapman Studio Equipment has been supplying camera support equipment to various productions. From feature films, commercials, television series, music videos to infomercials, Chapman has moved it, helping to create many of the memorable scenes we all know today!All along, Chapman has been involved with camera movement. Chapman equipment, under the careful direction of the Director, Director of Cinematography and Dolly Grip, has created moments of fear, impact, loneliness, confusion and many other emotions that camera movement can enhance for a scene.Chapman is continuing to develop new and improved ways to move the camera. Combining old techniques with new, it is their goal to accommodate the Director and Director of Cinematography in their creative process and obtain the image they want to etch on film.* Super PeeWee II Incorporates Brakes on Rear Wheels* Super PeeWee II Is Nickel Plated for Less Maintenance* Super PeeWee II Incorporates the Universal Stop Valve System* Variable Chassis Leg Adjustment Cam-Lock Chassis* Planetary Gear-Driven Arm* Hardened Stainless Steel Bushings* Works on Both Straight and Curved Tubular Track* Compact and Lightweight for Travel and Storage* Variety of Tires Available* Rear Controlled Steering* Vertical Arm Travel* Corrected Steering Geometry* Auxiliary Air Tank* Enclosed King Pin System* ELECTRIC PUMP SYSTEM* Many Accessories Available Maximum Camera Mount Height (without Risers) - 55"/1.4 mMaximum Camera Mount Height (Standard 12" Riser) - 67"/1.7 mMinimum Camera Mount Height (without Riser) - 24"/61 cmMinimum Camera Mount Height (90 Degree Plate) - 3"/8 cmVertical Travel - 31"/79 cm*Maximum Payload - 250 lb./114 kg**Maximum Payload with High Post Kit - 1,100 lb./500 kgMaximum Boom Lifts (Fully Charged) - 4 LiftsChassis Maximum Length (Wheels Fully Extended) - 43"/1.1 mChassis Minimum Length (Wheels Fully Retracted) -34,5"/88 cmMinimum Chassis Height for Transportation - 16"/41 cmChassis Width - Legs at 0° - 20"/51 cmChassis Width - Legs at 17° (Pneumatic Tire Position) - 23,5"/60 cmChassis Width - Legs at 45° - 28,5"/71 cmChassis Width - Legs at 90° (Sideways or Scissors Track Position) -32"/81 cmSteering Post Height - 35"/89 cmMinimum Turn Radius - 24"/61 cmMinimum Door Width PeeWee can be carried through - 16"/41 cmAccumulator Charging Time (Empty to Full) - 60sec.Carrying Weight - 280 lb./127 kgOperational Weight - 329 lb./150 kgOperational Weight w/ High Post Kit (w/o Payload) - 386 lb./178 kg*Payload Includes All Items (i.e. Man, Camera, Platform, Turret, Crane Arm, etc.) on Arm **Payload Includes All Items (i.e. Man, Camera, Platform, Turret, Crane Arm, etc.) on Base Mount
  • Weight - 123 kg (271 lbs)Minimum height - 69 cm (27 1/4")Maximum height - 138 cm (54 3/10")Lift range - 69 cm (27 1/4")Lifting capacity - 300 kg (661 lbs)Maximum column load with retracted column - 1000 kg (2,204 lbs)Maximum column load with elevated column - 500 kg (1,102 lbs)Column lift v max. - 3.6 sec.Sound level - 28 dB - 32 dBWind load max. - 40 km/h (24.86 mph)Columns - 2Pneumatic springs - 2Wheel legs - 4Wide gauge track. - 62 cm (24 2/5")Narrow gauge track. - 36 cm (14 1/4") Mot orDC servo-motor - D.C. electric motor with tachometerTorque at rated load - 1.00 NmRated current - 7.5 ARated speed - 4000 MinTension constant - 14 V/1000 MinTorque constant - .0.133 Nm/AMotor brake - DC 24 VMotor brake play - 0.4 mm
  • The Rickshaw can be configured to fit through doorways or have a larger floor plan for manouvering around the camera.Sandtires are optional possible.Threaded 3/8 UNC hole matrix to accept scaf clamps seat risers and other standard accessories.Quick release wheels can be easily adjusted back and forward, and up and down.Seat doubles as backrest for standing mode.Can be flat packed and easily assembled.
  • The brand new 4×4 Dolly by MovieTech is featured with many innovations which are not common in its class. The revolutionary thing about new doorway dolly is its steering system. By simply lifting the push bar, the operator can switch from 2- to 4-wheel-steering. A stable stainless steel steering gear ensures a long life and reliable switch control. Features:
    • 2- and 4-wheel extensions
    • 30,7inch (78cm) width (Doorway dolly)
    • Steeringmode adjustable at the Pushbar
    • Pushbar can be mounted on both sides of the dolly platform
    • Steeringmode “Crab” can be set with additional part
    • 7 mounting positions for turnstile on platform
    • 9 mounting positions for seatarms on platform
    • Pushbar with extensions for track-pushing (Extensions adjustable in various angles)
    • Levelling legs (optional) for Jib- or Crane constructions
    • Addition platform
  • The Twister Doorway Dolly offers you new possibilities concerning mobility and flexibility.
  • Tracking platform 62X88cm with Y skate wheels.

Title

Go to Top